Mold Cleaners & Degreasers

Lubricants

Mold Release

Removers

Rust Preventative

>>>>>>><<<<<<<
Home Page

About Us

Contact Us

Policy

SLIDEģ Spray Products - Mold Release
Secure On-line Ordering
SAME DAY SHIPPING OF IN-STOCK PRODUCT
Product Description:
40012N Paintable Biodegradable Mold Release
Light-duty biodegradable release. Paint over it, plate over it, hot-stamp over it. No spalling and no fish-eyes. Perfect finish. Odorless. Ideal production line release No special cleaning is needed before part decoration. You get perfect finishes every time and at least 25% more cycles per can over other comparable releases. Recognized by Underwriters Laboratories. Light duty mold release.
Cost is per case of 12 cans. 
$65.00     (In-Stock)
Qty:
(Cases)
40112N Regular Sil Mold Release 12-Oz
FDA Approved lubricant. No ozone depleting chemicals. Faster molding and more production. Eliminates rejects. Heat stable and non-toxic. Approved for food machinery. Lubricates. Non-staining. High-quality, pure silicone oil gives you more cycles per 12-ounce can. Save up to 40% in actual production. Very effective for all plastic molding operations, injection or compression. Heavy duty mold release.
Cost is per case of 12 cans.  $97.50     (In-Stock)
Qty:
(Cases)
40510 Econo-Spray 1 Mold Release
New and drier formulation. Non-paintable silicone. No ozone depleting chemicals. No methylene chloride. No chlorofluorocarbons(CFC's). Approved for food machinery. Econo-Spray(R) 1 contains a highly effective, non-paintable silicone fluid in a chlorinated solvent carrier system. It will give an excellent release with all thermoplastics, but is not recommended for polycarbonates. Cost is Per Case.
Cost is per case of 12 cans.  $51.00     (In-Stock)
Qty:
(Cases)
40710Econo-Spray 2 Mold Release
New and drier formulation. Paintable. No ozone depleting chemicals. No methylene chloride. No chlorofluorocarbons(CFC's). Econo-Spray(R) 2 is a paintable release in a chlorinated solvent carrier system. It permits post-decorating of molded parts without prior cleaning.
Cost is per case of 12 cans.  $52.25     (In-Stock)
Qty:
(Cases)

40810 Econo-Spray 3 Mold Release
New and drier formulation. Non-silicone paintable. No ozone depleting chemicals. No methylene chloride. No chlorofluorocarbons (CFC's). Food-approved. Econo-Spray(R) 3 contains a highly effective non-silicone release which is approved as a direct food additive in a chlorinated solvent carrier system. This product is highly paintable and will permit ultra-sonic welding of molded parts. It affords excellent release of all thermoplastics, but it's use is not recommended with polycarbonates.
Cost is per case of 12 cans.  $51.50     (In-Stock)
Qty:
(Cases)
41412N Polycarbonate Mold Release 12oz
Paintable release. No ozone depleting chemicals. No crazing or blemishing. Biodegradable and odorless. Specially developed for polycarbonate resins. It is ideal where parts are to be painted, hot-stamped or metalized. Approved by the General Electric Co. for use on Lexan resin. Recognized by Underwriters Laboratories. Heavy duty mold release. Heavy duty mold release.
Cost is per case of 12 cans.  $101.50     (In-Stock)
Qty:
(Cases)
41612N Econo-Mist Mold Release 11.5 oz
Silicone release FDA Approved Lubricant Approved for food machinery. Non-staining. Odorless. Contains the same high-quality ingredients as premium Silicone Release except formulated to be used for light-duty applications. For tougher models use the heavy-duty formulation found in Silicone Release(No.40112N). Light-duty mold release. Light Duty mold release.
Cost is per case of 12 cans.  $61.50     (In-Stock)
Qty:
(Cases)

42612H Universal Mold Release 12-Oz
Non-silicone paintable. No ozone depleting chemicals. FDA Approved lubricant. Use where parts must be painted, hot-stamped or metalized. Biodegradable and odorless. Universal meets certain requirements for molding medical products-write for details. It is food-approved but does not contain lecithins. Approved as a direct food addictive, you can use it on all thermo plastics including sensitive plastics. Permits ultrasonic welding of plastic parts. Recognized by Underwriters Laboratories.
Cost is per case of 12 cans.  $103.00     (In-Stock)
Qty:
(Cases)
44110N Hi-Temp 1800 Mold Rel 10oz
Non-silicone paintable. For temperatures up to 1800 degrees F. No ozone depleting chemicals. Ideal for latest high-temperature resins. It is also an excellent release for die-casting of low melting point metals such as lead, zinc and aluminum.
Cost is per case of 12 cans.  $109.00     (In-Stock)
Qty:
(Cases)
Quick Paintable mold release agent from Slide Products 44712E Quick Paintable Mold Rel   12oz
A medium-duty, all-temperature paintable mold release agent thatís fast-drying on cold and hot molds. Biodegradable and no chlorinated solvents. Imparts a smooth, dry non-toxic film. Use Paintable where parts will be painted, hot-stamped or metalized.
Cost is per case of 12 cans.  $68.00     (In-Stock)
Qty:
(Cases)
Quick Lecithin mold release agent from Slide Products 44812E Quick Lecithin Mold Rel  12oz
A medium-duty, non-silicone, paintable, all-temperature lecithin mold release agent thatís fast-drying on cold and hot molds. FDA-approved lubricant. Imparts a smooth, dry, non-toxic film. Lecithin is food-approved and paintable.*
Cost is per case of 12 cans.  $64.50     (In-Stock)
Qty:
(Cases)

45712N Pure Eze Mold Rel 11.5 oz
Non-silicone paintable. An excellent all-purpose release. Neutral white-oil-based release. No lecithins. Won't turn color or turn rancid. USDA rated H1. Use Pure Eze with all thermo plastic resins, polyolefins, polycarbonates, rubber and some epoxies. It is a white oil-based release that is ideal for medical and food applications. Because it is formulated with a highly refined mineral oil, it is colorless, odorless, tasteless and will not change color over time.
Cost is per case of 12 cans.  $69.50     (In-Stock)
Qty:
(Cases)
 
NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.

Contact Slidespray.com   |   Home   |   About Us